Bug description (state clearly and simply): PLY Crashes SSP when Coarse frequency set below 200 when connected to INP (Will not occur if INP is not connected to PLY), will also happen when PLY is receiving pitch data via input CV.
Steps to reproduce (use numbered list):
- Start with blank patch, adding INP, PLY, and OUT
- Feed pitch CV from Input 1 to PLY:Pitch (not necessary to replicate crash, see not below)
- Feed PLY out to output for monitoring
- Feed pitch CV to SSP
- Adjust PLY Coarse freq below 200 (with X over green orb it happens at almost 100%, with X over red orb there is sometimes an audible “glitch” and adjusting rapidly <200 will result in ultimately crash), note: may need to rapidly cycle freq if not feeding pitch CV.
Software version (blank if unknown): 29052022
Type (major or minor): Major, justification: hard crash